Nut Clamps for 20mm Extrusion
by iquizzle, published
Don't have enough t-nuts in your extrusion? Ooops! Well grab a pair of my nut clamps and clamp your nuts to that stiff aluminum. My nutty clamps will clamp your nuts so firmly that wobble and shake will be a thing of the past. Just jam your nuts in the slots and screw down the clamps until the desired pressure is achieved. The parametric file accommodates nuts of many shapes and sizes, so regardless of how big or small your nuts are, you'll be guaranteed to get them in a bind.
Add a mount point anywhere you want it! Easily choose between M3, M4 and M5 for the clamping screws or mounting nuts by setting a parameter in the scad file. Use these to securely and directly mount ramps boards, ATX PSU boards or anything else you can think of without the use of t-nuts. Uses ~30mm long clamping screws. M4 clamp (black screws) x M5 nut (silver screw) shown.
Liked ByView All
Give a Shout Out
Nut Clamps for 20mm Extrusion by iquizzle is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure iquizzle would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).