by damm301, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The town of Winterfell, as seen in the title sequence of the TV series "Game of Thrones"
--- featured on wired.com: http://www.wired.com/design/2013/02/3d-printed-mini-winterfell/ ---
This model was built from scratch, based on screen captures from the Game of Thrones title sequence. There, a short fly-over of Winterfell is shown, whilst the town builds up from the ground .
The model does not include Godswood which would be right next to Winterfell
I have replaced the original STL file with two new ones.
The Winterfell.STL is all the buildings, but does not include any door/window openings. The Winterfell_detailed.STL file though adds Windows and Doors to many of the buildings.
This model was designed in Solidworks from the ground up, based on one screen capture (see attached). It printed successfully on a Replicator 2 using 0.2mm layers, 10% infill, 2 shells, with a size of about 80x80mm.
Winterfell by damm301 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving damm301 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure damm301 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).