Christmas Light Winder
by Schenkzoola, published
For storing Christmas lights. Stores two strings, fits neatly into a milk crate.
Laser cut this out of your favorite substrate. I used 1/8" masonite. The scale on the .dxf is 1" per unit. Holds two strings of lights.
The holes in the middle are meant for the ends of the light strings. Feed the end through the hole with the slot, hook on the slot and start winding. If the slot doesn't work for you you can use the hole with the tab, and feed the wire under the tab to lock it into place.
Liked ByView All
Give a Shout Out
Christmas Light Winder by Schenkzoola is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Schenkzoola would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).