LEGO Brick 3x2
by geodesign, published
Changes in model may occur based on user's feedbacks. Let me know if you experienced some issues!
Recent Commentsview all
I was curious if the pictures of actual makes are generally representative of the quality of most 3D printers. Can you adjust the print speed for better results? Can you change the micron resolution to get a smoother end result? Is that all dependent upon the file used or can it be adjusted depending on your printer? I'd love to get a 3D printer to make some Lego pieces but generally the pictures of finished products don't have me enthused.
i had absolutely no joy printing it from bottom/top down, however it seems to print much better side on. I slowed down the Ultimaker to 58% & it's coping well.
Finally - a pink lego brick for the kids! :)
Liked Byview all
Give a Shout Out
0.05mm layer thickness recommended.
May need support elements (experienced user's comment will be highly appreciated)
Exact (1:1) brick size must be: 15.8mm x 23.8mm x 9.6mm
(9.6mm height is without the studs on its top, with studs the height is 11.352mm)
You must be logged in to post a comment.