X carriage M90 Fan
by Weedz, published
This is my way to add a fan to the Carriage of the Mendel90. The Hotend from hotends.com which work perfectly can use a fan for better printing. As the new MKV-B is shorter i had problems directing the flow correctly to the upper part of the PEEK, without adding much more parts to the carriage.
At the moment its made for the sturdy version of the Mendel90 of Nophead http://www.thingiverse.com/thing:17826. 10mm smooth rods 60mm apart.
If needed i could make the other files accesseble and/or deliver one for the 8mm smooth rod version
I printed this in Black PLA and works perfectly, the upper part of the hotend stays cool to the touch. i would prefere to print this in ABS as it could get warm and warp but to this point i had no problems with it.
This is ready from the T2.5 timing belt but there should be no problems connecting a T5 or other to it. The other parts to strap the timing belt can be used from the original files from Nophead.
i use the fan from a Asus mobo fan but wich can be purchased at the ASUS site but probably you can get somewhere else
The lit is to prevent the hot air from the hotbed to get to the fan thus ensuring colder air from the to of the carriage and to conduct the airflow.
Liked ByView All
Give a Shout Out
X carriage M90 Fan by Weedz is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Weedz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).