KitchenAid Toaster Oven Knob
by azzeloof, published
A replacement for the "Cook Time" knob on our KitchenAid toaster oven. While not 100% the same as the original knob, you can't really tell the difference between it and the others unless you look (except for the fact that I printed it a different color).
The knob should fit on any standard .237" (6mm) shaft with flat edge.
Please give feedback if you have any....I'm open to suggestions if you would like anything modified. And feel free to click "Made One" If you did, I would love to see my design being used :)
I printed it on a Replicator 2 with 50% infill, 0.1mm layer height, and 3 shells. After printing just stick it on the toaster. You may have to open the hole up a bit with a file depending on the resolution of your printer. I had to press fairly hard to get it fully on.
Liked ByView All
Give a Shout Out
KitchenAid Toaster Oven Knob by azzeloof is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving azzeloof a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure azzeloof would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).