Arduino Case
73
Likes
2688
Downloads
3151
Views
Published on September 4, 2010
This thing was Featured on September 5, 2010
Description
3d printable (makerbot etc) arduino case. Clean up those prototype projects by encasing your arduino in a neat box.
Un-tested as of yet due to my makerbot\\\'s clogged nozzle, currently waiting for MK5 extruder head to ship to be able to test it out and modify it if need be.
Allows for easy plugging in of usb cable. There is a hole at the back of the case which allows for output/feedback wires to be bundled together and covered in heat shrink tubing.
Un-tested as of yet due to my makerbot\\\'s clogged nozzle, currently waiting for MK5 extruder head to ship to be able to test it out and modify it if need be.
Allows for easy plugging in of usb cable. There is a hole at the back of the case which allows for output/feedback wires to be bundled together and covered in heat shrink tubing.
Instructions
Hex key needed
should assemble with M3 nuts (fittings can be obtained from makerbot spare parts kit)
I have not yet tested this design, so if you do go ahead and print it could you please drop a comment
should assemble with M3 nuts (fittings can be obtained from makerbot spare parts kit)
I have not yet tested this design, so if you do go ahead and print it could you please drop a comment
You must be logged in to post a comment.
embeddedprogrammer
on
May 26, 2011
said:
Strong work, fits perfectly and looks very professional. Also the round hole was just what I needed for my servo control wires. I use 4/40 pan heads to finish. Thanks for posting this. :)
Anonymous
on
December 17, 2010
said:
Great case! I used a dimension sst1200es. The only thing i would add is another standoff near the PWR hole. But, the two screws hold the board very well, used 4-40 mach screws. The power jack is exactly flush with the case, very nice.
Collections
Arduino/Raspberry/cases
by DannyVD
Things to Make
by hwiguna
Enclosures Boxes Construction
by solotrek
License
More from ytid
Not sure what happened. I didn't notice until after I printed it out that the standoffs are backwards. Has the file been modified since the other guys printed it out successfully?
Standoffs are backwards on mine as well. :(