RAMBo adapter for RAMPS mounting holes
4
Likes
226
Downloads
648
Views
Published on January 1, 2013
Description
In case you have RAMPS mounting holes on a frame but want to mount a RAMBo board in its place instead. Use this and you're set.
Instructions
Print. Mount plastic part using RAMPS holes. Mount RAMBo board. Done.
I made this after seeing the "Sanguinololu adapter for RAMPS mounting holes" by Sound: thingiverse.com/thing:39893.
NOTE: The RAMBo board has hole spacing of 95mm x 96mm with the 96mm spacing being the length that is parallel to the the USB port direction. ramps-rambo.stl has the RAMPS braces running perpendicular to the USB port. ramps-rambo90.stl has the RAMPS braces running parallel to the USB port. This might be critical for some situations.
I made this after seeing the "Sanguinololu adapter for RAMPS mounting holes" by Sound: thingiverse.com/thing:39893.
NOTE: The RAMBo board has hole spacing of 95mm x 96mm with the 96mm spacing being the length that is parallel to the the USB port direction. ramps-rambo.stl has the RAMPS braces running perpendicular to the USB port. ramps-rambo90.stl has the RAMPS braces running parallel to the USB port. This might be critical for some situations.
You must be logged in to post a comment.
License
RAMBo adapter for RAMPS mounting holes by sgraber is licensed under the Attribution - Share Alike - Creative Commons license.
More from sgraber
More from 3D Printer Accessories
WOOHOO, you took my suggestion. Very nice. :)
Yup! :)
I'll throw together ones for Azteeg X3 and RUMBA later this evening if I have the time.