Extended Y-axis Endstop Mount
by kicekilla, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this very basic part to extend my Y printable area about 15mm. I had to do a little drilling and cleaning up, but it works great for what I wanted.
I designed it for my 8mm threaded rods. attach it to the top threaded rod where your existing y endstop is. the pictures should help if my instructions are unclear. mount can swivel about the threaded rod slightly to adjust the distance you want.
just realized I uploaded the part at a weird orientation. just rotate it in netfabb or similar
Extended Y-axis Endstop Mount by kicekilla is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving kicekilla a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure kicekilla would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).