iPad mini stand
by MisterG, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a cool little stand to securely hold your ipad mini on your bedside table.
I needed a stand to hold my iPad mini on my bedside table. Makes an amazing alarm clock !
The stand has splayed legs for stability and has built-in horns to redirect the output from the speakers to the front when the ipad is in portrait mode.
The sound is surprisingly good but a little lacking in bass.
The stand was designed using ProDesktop 8 and printed on a UP! 3D printer in white ABS. The printer was set to loose fill at a .25mm resolution with 30 degrees support structure. I have optimised the design for clean snap off of supports.
Pro-Tec surface protector strips have been glued to the base to stop it sliding around the desktop when being used.
The lightning connector is a close fit and you may need to flex the cable a little to get some room.
iPad mini stand by MisterG is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MisterG a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MisterG would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).