Reprap power supply terminal cover
by Wired1, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Name says it all really, these power supplies are perfect for reprap printers but they do have horribly exposed live terminals giving you a nasty little surprise when your fingers slip while adjusting the output voltage.
The cover mounts using the existing slots in the front of the power supply and neatly covers the terminals yet still give you access to the adjuster trim pot as well as the friendly green "on" LED.
Print it out and mount it with 2 of M3 x 8mm machine screws and nuts or equivalent.
Recommend printing it at 100% infill as it is only 2mm thick.
Added version 2 with "LIVE WIRES" text added.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Reprap power supply terminal cover by Wired1 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Wired1 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Wired1 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).