Dioder Mounting Bracket
1
Likes
72
Downloads
911
Views
Published on January 3, 2013
Description
Hey Folks
My second thing is for mounting the IKEA Dioder (RGB-) LED stripe in your Ultimaker/3D Printer.
It tourns out, that IKEA uses stock RGB SMD LEDs (WS2811) like the ones from Kingbright.
Usualy they have a angle about 120°, so it's nessecary to mount them in 45° direction to use the full light cone.
My second thing is for mounting the IKEA Dioder (RGB-) LED stripe in your Ultimaker/3D Printer.
It tourns out, that IKEA uses stock RGB SMD LEDs (WS2811) like the ones from Kingbright.
Usualy they have a angle about 120°, so it's nessecary to mount them in 45° direction to use the full light cone.
Instructions
Sorry for that filesize - Inventor created that volume...
Print for each stripe 2-4 brackets.
Glue that stuff with the provided (white) pads in your Printer.
Hack it like a Boss: christian.amsuess.com/tutorials/threebutton_dioder/
Or you can connect your Dioder light with an ULN2003 (logical Array) and use it as an Relay.
Greetings, Noc
Print for each stripe 2-4 brackets.
Glue that stuff with the provided (white) pads in your Printer.
Hack it like a Boss: christian.amsuess.com/tutorials/threebutton_dioder/
Or you can connect your Dioder light with an ULN2003 (logical Array) and use it as an Relay.
Greetings, Noc
You must be logged in to post a comment.
License
Dioder Mounting Bracket by Noctis is licensed under the Attribution - Non-Commercial - Share Alike license.
More from Noctis
More from 3D Printer Accessories
Any idea why the STL 19MB in size? That's HUGE!
yes. Inventor details the STL Model that much.
If I don't do that, the Model will be 1/10th smaller. There is a bug in my version, that doesn't calc cm in mm right
I'll upload a new one next days