by Chillance, published
Since I really like the simplictic solution here https://groups.google.com/forum/#!topic/deltabot/VM9439t1Ggc/discussion (yes, the site doesn't parse the URL properly), and I also have those Openbeam parts, I decided to try to create the kossel roller to make that design work. So far I've done what can be found here, but this is a work in progress. I decdided to put this here in the meantime, in case someone feels like improving or have anything else to improve this!
Main issue here is putting on the lower rubber band on the front... and I haven't tried this part yet... also, the holes for nuts for the rods needs to be larger...
Use 4 M3 screws and 4 623ZZ bearings inside to have contact with the extruded aluminium. Tighten with rubber band.
Oh, and I'm using this as well: http://www.thingiverse.com/thing:21731
Liked ByView All
Give a Shout Out
Kossel Roller by Chillance is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure Chillance would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).