MendelMax USB B connector bracket
0
Likes
177
Downloads
564
Views
Published on January 3, 2013
Description
Having the RAMPS electronics inside the printer frame, connecting a USB connector is pretty hazardous, both for me and for the current print.
I made an extender with a USB B socket and a USB B cord I had laying around to connect my RAMPS. This is the bracket to hold the USB extension cord on the outside of the frame. The dimensions of the USB B socket match the USB specification, but make sure the face of it is 12 x 11.5 mm before printing.
A variant without the plastic tab to clip the socket is also available should you desire to hot-glue the connector.
The soldering to extend the USB port of the RAMPS itself is left as an exercise to the reader.
I made an extender with a USB B socket and a USB B cord I had laying around to connect my RAMPS. This is the bracket to hold the USB extension cord on the outside of the frame. The dimensions of the USB B socket match the USB specification, but make sure the face of it is 12 x 11.5 mm before printing.
A variant without the plastic tab to clip the socket is also available should you desire to hot-glue the connector.
The soldering to extend the USB port of the RAMPS itself is left as an exercise to the reader.
Instructions
No instructions provided.
License
MendelMax USB B connector bracket by jothan is licensed under the Creative Commons - GNU GPL license.
More from jothan
More from 3D Printer Parts
You must be logged in to post a comment.