Loading

iPhone 5 Case: Nerv SH-06d

by recklesstryg, published

iPhone 5 Case: Nerv SH-06d by recklesstryg Jan 3, 2013

Description

iPhone 5 case that looks like the phone made in Japan for the Evangelion 3.0 movie. Named the Nerv SH-06D

Recent Comments

view all

I've been having similar problems! To be fair, I can't print any cases on the Rep 2 without failing. Do you know what it means when it's printing the sides of the cases and suddenly stops extruding? I'm thinking either flow rate is too high and it gets jammed or feed rate is too fast.

Do you have successful settings for more standard iPhone cases?

Thanks, I am sure people would love to know.

Ah, gotchya. I'll try scaling it a little bit, and do a couple more test runs. I'll put up another post if I find a configuration that works well for the MakerBot.

Thanks for the fast reply.

More from Mobile Phone

view more

Makes

Liked By

view all
me

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Comments

You must be logged in to post a comment.

Weirdwone on May 20, 2013 said:

Super cool design.

I've had some trouble getting it to turn out using a Replicator 2. I tried it the first time on high quality with rafts and supports, but the model bonded with the raft and couldn't be removed. Tried again on medium with only supports, but I had trouble removing all of the supports on the inside of the case and it didn't fit the phone.

Any tips/tricks on how to position the model on the build platform or what settings to use? I'm currently placing the back of the case flat on the middle of the build platform.

I'm determined to get it to work because it's fantastically awesome. ;-)

Thanks!

Gozeeta on May 21, 2013 said:

I've been having similar problems! To be fair, I can't print any cases on the Rep 2 without failing. Do you know what it means when it's printing the sides of the cases and suddenly stops extruding? I'm thinking either flow rate is too high and it gets jammed or feed rate is too fast.

Do you have successful settings for more standard iPhone cases?

recklesstryg on May 20, 2013 said:

I used Shapeways to Print my case. Ben Rockhold had to scale Up to 101%.
What I would do is:
1) Measure the from the inside on one side to the other side.
2) Measure the out side of your Phone
3) Divide #1 into #2: #1/#2=Scale%

I have to do this with some of my files that I print.

As for the rafts. I don't know what to tell you. I have access to a Stratasys Mojo printer and have a soluble support material.

BenRockhold on Feb 8, 2013 said:

I printed one! I had to scale it up to 101% to fit my phone, and printed with support material to hold the tabs up. I think it worked great!
Have you considered sharing the original files? I'd like to make some small changes.

recklesstryg on Feb 8, 2013 said:

No problem, I will get them up in the morning.

BenRockhold on Jan 7, 2013 said:

This is really cool!
What tool was this designed with?

recklesstryg on Jan 7, 2013 said:

AutoCAD 2009 Electical

Top