Twistlet
Description
I'm thinking of using something similar in future as a tyre on a toy car.
Instructions
UPDATE - A step file has been added if anyone wanted to play with the design.
You must be logged in to post a comment.
the r2 acrylic plate is just horrible! it is very warped
glass plate is almost the only way you can get flat prints
usually people go to a local glass shop and get it custom cut for 15-25$
to anyone else, it is easy to cut glass and the tool is only $10 plus the 2$ glass from home depot
Thanks, yeh the levelling process is one of the various problems I'm having with the rep2 so far, I guess it's down to the build plate.
The final checkpoint at the end of the levelling process is always a lot tighter than all the other points. I may have to go down this route.
I just printed this, it has to be the best looking print I've made to date. Finally got this machine to print at .1mm layer height successfully, thanks to my newly cut glass build plate (Thanks Dearco!)
Nice work, man. It printed excellently!
License
Could you produce an stl without the bottom and top closed? If I slice and print on my replicator, the filled structure also comes out.
Have you tried slicing it with 0 infill and 0 shells? I can try when I have a spare minute although I'm not sure how thick to make it so that it only prints 1 shell