Arduino Drill Template
8
Likes
138
Downloads
698
Views
Published on January 3, 2013
Description
This drill template is for drilling Arduino mounting holes near the corner of a surface.
This year in the Motorola Explorers we are building Arduino controlled robots and we have to mount the Arduino on top of a piece of plexiglass. This template made drilling the holes for all 16 bots easy.
The Template is setup for an 1/8" drill.
The distance in from the corner can be adjusted in the OpenSCAD file.
This year in the Motorola Explorers we are building Arduino controlled robots and we have to mount the Arduino on top of a piece of plexiglass. This template made drilling the holes for all 16 bots easy.
The Template is setup for an 1/8" drill.
The distance in from the corner can be adjusted in the OpenSCAD file.
Instructions
Print the STL file at .3mm layer height, 15% infill, 1 extra shell.
To change the offset edit the values for Xoff and Yoff in the source file.
To change the offset edit the values for Xoff and Yoff in the source file.
License
Arduino Drill Template by JoeyC is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from JoeyC
More from Hand Tools
You must be logged in to post a comment.