Closet Bar Clip
by AlexEnglish, published
This is a ridiculously simple thing. It is intended to keep things from sliding on a closet rod.
I made this a long time ago, but finally figured I'd put it up in case it could be useful to someone else.
These could be useful in the closet of a motor home or trailer, or maybe for organization in a home closet.
I made this to help feed plastic to my printer. In my basement home-office, I have a closet rod hung up between rafters on which I hang my filament to feed to the printer below. These clips go between the spools to keep them from sliding around or rubbing against each other and creating friction.
The STL presented here is for a 1.25 inch diameter closet rod. If you need a different diameter, just tweak the ir (interior radius) variable in the scad file for what you need.
Give a Shout Out
Closet Bar Clip by AlexEnglish is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure AlexEnglish would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).