Mini Plunge Router
42
Likes
641
Downloads
3239
Views
Published on January 4, 2013
Derived from
Dremel plunge router
by Glyn
Description
A small plunge router attachment for Dremel. You can modify it for another mini drill e.g. Proxxon.
Instructions
PLA, printed with 0.5 nozzle and 0.5mm layer thickness. With a little cleaning up, the thread detail was good enough for the Dremel threaded neck to fit. Same for the depth adjusting M8 bolt.
Post-print drill the guide bushing with an M8 drill. Lubricate with a puff of silicone or PTFE spray.
Safety note: even a mini drill deserves respect for safety sake!
As the spindle is mounted on the threaded nose only, it can easily be overloaded. For a more secure design: thingiverse.com/thing:17945
[2013-01-05] Baseplate Stl update; round space for the top hex nuts
[2012-01-07] Knobs added (made with thingiverse.com/thing:11797)
Post-print drill the guide bushing with an M8 drill. Lubricate with a puff of silicone or PTFE spray.
Safety note: even a mini drill deserves respect for safety sake!
As the spindle is mounted on the threaded nose only, it can easily be overloaded. For a more secure design: thingiverse.com/thing:17945
[2013-01-05] Baseplate Stl update; round space for the top hex nuts
[2012-01-07] Knobs added (made with thingiverse.com/thing:11797)
License
More from blokkendoos
More from Machine Tools
Do you have a hardware list?