Arduino Uno/Yun Base
by cesalv, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A thick base to mount Arduino Yun board. Right side is long enough to protect SD card installed and has a 20mm hole to fit a Grove sensor module if needed.
29/8 - Added a stand to keep yun+base on vertical position.
Update: It also holds Arduino Uno boards (it has same shape as Yun)
Printed using 1.75 PLA at 0.15mm layer height and 60% filling.
Screw holes fits 3mm screws up to 10mm long (the hole near the pin sockets requires a very small head screw, but the other three are usable)
Arduino Uno/Yun Base by cesalv is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cesalv a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cesalv would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).