by stubeans, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Decorative snowman figure.
Although obscured in the STL preview image, the arms are part of the model.
Print. You can use small snippets of 3mm filament as pegs for the holes then press the two halves together. I ran a soldering iron over the seam to really fuse the pieces. Paint to taste.
Snowman by stubeans is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving stubeans a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure stubeans would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).