GoPro Hero3 Frame - Improved
by TheCase, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I took inspiration from raster's original design, but added traps to lock the camera in place. Also added some lens protection, in case the thing falls over.
Also, check out my lens cap for this camera: http://www.thingiverse.com/thing:39880
Insert the frame and the stay into the mount.
Make sure the stay is pressed up against the bottom of the camera, to secure it in place.
might also be a good idea to line the inside of the frame with electrical tape, for scuff protection and additional "staying power"
GoPro Hero3 Frame - Improved by TheCase is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TheCase a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TheCase would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).