Mount for electronics
by antalakas, published
This set of printable objects is used to mount electronics on a custom mobile robot (rover)
Main mount is revised, errors corrected, holes opened for servo controller and IR adapters.
IMU mount is revised, smaller holes, better mount stand.
IMU cap is created and added
Added standalone mount for IR adapter
First of all please note that files miniitx1.stl, miniitx2.stl are based on the thing http://www.thingiverse.com/thing:24270. I could not print the original part as a whole, so i redesigned it in tinkercad as two objects. I glued them together later, to form the mini-itx stand.
The imu.stl file is used to mount an imu unit (http://www.pololu.com/catalog/product/1263). It needs a cap to be finalized, the first reason i have marked this as work in progress.
Mount3B.stl is the newest version of a mount that can hold several components. I have not printed it yet, but i am very confident that it is much better from the "3A" version that i use now. This is the second reason i have marked this as work in progress.
Mount3B can hold:
- IR Distance Adapter (http://www.phidgets.com/products.php?category=2&product_id=1101_0)
- Same as (1)
- Servo controller (http://www.phidgets.com/products.php?category=11&product_id=1066_0)
PhidgetInterfaceKit 8/8/8 (http://www.phidgets.com/products.php?category=0&product_id=1018_2)
M4-ATX power supply (http://www.cartft.com/catalog/il/903)
Liked ByView All
Give a Shout Out
Mount for electronics by antalakas is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving antalakas a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure antalakas would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).