Mendelmax 12v to 24v converter mount
by PeterEllens, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a simple mount for the 12v to 24v converter supplied with Trinitylabs Y axis upgrade kit.
NB 50cm fan pictured is not part of the upgrade kit. I added this after numerous warnings that it gets very warm.
STL file has been run threw netfab.
scad code is included, standard disclaimer, as is where is..
Code is reasonably parametric, easy to make size changes for most things.
PCB mount holes are counter sunk underneath, so this piece is flat on the base when assembled.
Mendelmax 12v to 24v converter mount by PeterEllens is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PeterEllens a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PeterEllens would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).