by 3Design3, published
A simple cup, recommended for cold drinks (no handle)
My first cup made of a simple parabolic structure, cutting off the base. Maybe someone adds a handle to it?
I made the structure as lightweight as possible, with a wall about 1mm thick. This is enough to hold liquid inside, but be careful not to press too strong on the walls while holding it, because it may break! Printing time about 1hr.
The red bottom (see 2nd picture) is because I changed from red to yellow filament before and wanted to see how it changes during printing.
Liked ByView All
Give a Shout Out
cup by 3Design3 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 3Design3 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3Design3 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).