by vandeesr, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The box is made to dimensions of 130mm length, 70mm wide and 50mm high. The box was designed as a general electronic parts storage box.
The constraints of the box are very tight so may need some sanding. The lid is also designed with tight constraints, and requiring glue to be used to fix the handle to the box lid. Print all parts with the flat surface on the build plate. This parts box was printed under medium quality 10% infill.
Parts box by vandeesr is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving vandeesr a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure vandeesr would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).