Alternate Y Axis Mounting Bracket for Bukobot
by r0b07h4ck3r, published
The Y axis on the Bukobot (http://www.bukobot.com) is secured with two bolts, I created this bracket to firm up this connection. It also helps with keeping the Y axis perpendicular to the rest of the frame.
Make two, one for the front and one for the back. If you mounted your power supply under the Y axis, just use one for the back. You will need to remove or loosen the two bolts holding the Y axis. Use the same size bolts M5 x 10mm.
Liked ByView All
Give a Shout Out
Alternate Y Axis Mounting Bracket for Bukobot by r0b07h4ck3r is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving r0b07h4ck3r a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure r0b07h4ck3r would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).