Shadow Battlecrab - Babylon 5
14
Likes
357
Downloads
918
Views
Published on January 14, 2013
Description
"What do you want?"
A model of the infamous Shadow Battlecrab spaceship from Babylon 5.
You will hear a scream in your mind as you get one of these finished.
A model of the infamous Shadow Battlecrab spaceship from Babylon 5.
You will hear a scream in your mind as you get one of these finished.
Instructions
Print with 25% infill and loads of support and retraction enabled.
Model is a pain to print, and can be used as a retraction benchmark.
Files included are a full ship and the top and bottom hull shapes so as to improve print quality.
Also included is a full ship with the quantum gap between top and bottom hulls connected so as to ease larger print jobs.
If organic skin material is not available then use ABS/PLA preferably black.
Telepath not included
Model is a pain to print, and can be used as a retraction benchmark.
Files included are a full ship and the top and bottom hull shapes so as to improve print quality.
Also included is a full ship with the quantum gap between top and bottom hulls connected so as to ease larger print jobs.
If organic skin material is not available then use ABS/PLA preferably black.
Telepath not included
You must be logged in to post a comment.
foosel
on
January 15, 2013
said:
In the whole version, the upper and lower part are separated in the STL by a tiny strip of air. When printing the first time I was fortunate enough that due to stringing the whole thing stayed together, but I guess when printing a bigger version I might get a problem here... Could you merge those two parts into one somehow?
License
Shadow Battlecrab - Babylon 5 by VGer is licensed under the Attribution - Share Alike - Creative Commons license.
More from VGer
The quantum gap... I assumed that any problems would be solved by stringing or by the support (internal).
I will generate a model with posts through the gap just on the safe side.