small box with lid
by Uinsel, published
The box was designed to store items from boardgames.
It was printed with a Prusa Mendel (0.5mm nozzle) with a 3 mm ABS filament. I used a solidity ratio of about 0.15 with rectangular infill pattern and a solid surface thickness of 2 layers. Nozzle temperature was about 220Â°C and the substrate (glass coated with ABS-Aceton solvent) was heated to 90Â°.
The weight of the box including the lid is approximately 0.05 kg.
Liked ByView All
Give a Shout Out
small box with lid by Uinsel is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Uinsel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).