Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
ALPHA
34
Likes
2550
Downloads
3120
Views
Published on January 11, 2013
Description
This is my GrabCAD
MakerBot Replicator 2 Desktop 3D Printer Challenge Entry.
grabcad.com/library/alpha
If you like it, let me know!
MakerBot Replicator 2 Desktop 3D Printer Challenge Entry.
grabcad.com/library/alpha
If you like it, let me know!
Instructions
the files are designed for a printvolume of about 28cm x 15cm x 15cm.
If put together in the right order, there should be no need for gluing the parts together although I would give it some extra stability.
Furthermore you need two specific screws:
A pan head cross recess screw (M3 x 16) for the front and a
pan head cross recess screw (M4 x 16) for the back
If put together in the right order, there should be no need for gluing the parts together although I would give it some extra stability.
Furthermore you need two specific screws:
A pan head cross recess screw (M3 x 16) for the front and a
pan head cross recess screw (M4 x 16) for the back
You must be logged in to post a comment.
kojote
on
February 13, 2013
said:
Pretty awesome - heard you're from Germany, would love to see your work in Reallife at the upcoming Make-Munich.de Maker Faire in April
tommylin
on
February 2, 2013
said:
Good job~ Omega,
I'm print it out, and a small modify, add driver on sit.
omega
on
February 2, 2013
said:
hey tommylin
thanks very much for the printout! Its perfect!!!!! the driver absolutelly belongs there, so its a nice improvement! glossy black spraypaint and silverspraypaint for the engine part could work, but I dont know if it holds onto the printed material. but good luck with it, an please share with us!!!
regards
omega
How did you paint that?!
the images were rendered with keyshot. but there should be a way to give a reallifemodel a similar black glossy look