by E_T, published
Combination derivitive of Fractals knuckle link, Open designs initial drawings and the previous knuckle lounger.
The seat explores using the knuckles in a configuration where they become a maluable surface.
Whole seat is made from 18mm ply sheet.
You need a grand total of 216 knuckle links so get that spindle warmed up...
There are wee circles which go inbetween the open ends of the knuckle lay out. you need 62 of these.
All knuckles are joined by an M10 threaded rod.
The legs and cross braces slot together, only cut one of each. These would be best to glue in place to avoid failure. I have tried to arrange the crossbraces and the side panels in a way which will produce a stable and strong structure. Yet to be tested though so take care on the first sit.
Liked ByView All
Give a Shout Out
KnuckleSeat by E_T is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving E_T a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure E_T would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).