Round Drill Bit Holder For HF 13 PC set
5
Likes
190
Downloads
415
Views
Published on January 10, 2013
Description
This is a drill bit holder for Harbor Freight 13 Piece Titanium Nitride Coated Drill Bits, Item # 01800. They have hex shanks for screw drills, and I use them at work all the time. Someone at work wanted a round holder, so I made one, and it's blue.
Here's a link to the original drill bit holder that is straight, and green.
thingiverse.com/thing:40596
Here's a link to the original drill bit holder that is straight, and green.
thingiverse.com/thing:40596
Instructions
I printed this in blue ABS from 3DprinterStuff at 230C, and a HBP with Kapton tape at 100C. Sailfish at 100 mm/sec, and drandolf's Replicator hood installed. I also used a raft because my Kapton is getting muggly, and I didn't want to replace it just yet. There's also a cavity on the bottom for a ballast. I stuck the ballast in there with VHB (very high bond) tape. Very awesome stuff that tape!
License
Round Drill Bit Holder For HF 13 PC set by PropellerScience is licensed under the Attribution - Share Alike - Creative Commons license.
More from PropellerScience
More from Tool Holders & Boxes
You must be logged in to post a comment.