Enlightened Project Box
by HalJ, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
44x55x40mm project box with an Ingress Enlightened logo on the lid.
It was designed to house an Ingress themed cell phone charger I built.
Depending on your printer, you may need to drill the holes out after printing. They are set to be 1.5mm in diameter, but mine got filled in.
Enlightened Project Box by HalJ is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving HalJ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure HalJ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).