Christmas LED candle recycling Brain Slug
by GigaGremlin, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Normally I prefer the 50% Version of this Figure, but finally I found a way to recycle the Christmas LED candles.
But now I need to get more, cause the Kids like them, as night light...
For the white one I've used night glowing PLA and exchanged the yellow LED with a bright white one so it can feed itself while it lit...
Cause it's almost hollow, the weight of the finish one is 11 Gramm.
I've used PLA with 66% Infill, 2 Shells and 0.2 Layer Heigth
Important: My LED candle ( The used Inlet) is 36 mm in diameter and 20 mm height.
Christmas LED candle recycling Brain Slug by GigaGremlin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GigaGremlin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GigaGremlin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).