by decross, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a rocket intended to use a cx-0 rocket engine. After launch, it should launch a finned bottle rocket.
This has not yet been tested, and should be tested by holding lightly at center of gravity and spinning around. If the rocket is parallel to your body, add some weight to the nose. If not, you do not need to add any weight. This rocket has no parachute, so launch away from inhabited areas, but is so light it should not break upon impact with the ground.
Make a finned bottle rocket by cutting fins out of notecards and gluing them to the bottle rocket.
Stuff some aluminum foil in the top of the rocket, and it should ignite the bottle rocket if you make a small hole in the aluminum foil.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rocket by decross is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving decross a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure decross would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).