Loading

Raspberry Pi B+ Face Case

by adafruit, published

Raspberry Pi B+ Face Case by adafruit Aug 5, 2014

Description

In this project we're designing and 3d printing an enclosure for the rasberrypi B+
Get inspired to design with style in mind, like why not put a face on it?
Anyway, a 2 piece design make its easy to take apart and using standoffs on both parts allow you to secure the enclosure together with machine screws.
What ideas do you have for your own Raspberry Pi B plus case? let us know in the comments below.
For full instructions check out the guide on the Adafruit Learning System.
https://learn.adafruit.com/3d-printed-raspberry-pi-b-plus-enclosure/

Recent Comments

view all
I thought I'd say thank you to Adafruit for putting this design out there. We printed this case with standard quality (0.2mm layer thickness) in ABS and it turned out nicely, though not perfectly, as you'll see from our pic. We used 4 x 1/2 sheet metal screws to seal and hold the case together. We also appreciate the Share Alike licensing. I posted a pic of the back of the case with the cute smiley. Nice job : )
after seeing this cool case, I suddenly see someone making a domo raspberry pi B+ case. :P

More from Electronics

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Aug 21, 2014 - Modified Aug 25, 2014
I thought I'd say thank you to Adafruit for putting this design out there. We printed this case with standard quality (0.2mm layer thickness) in ABS and it turned out nicely, though not perfectly, as you'll see from our pic. We used 4 x 1/2 sheet metal screws to seal and hold the case together. We also appreciate the Share Alike licensing. I posted a pic of the back of the case with the cute smiley. Nice job : )
after seeing this cool case, I suddenly see someone making a domo raspberry pi B+ case. :P
Top