120mm film canister
by guydebored, published
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/0sqMlnY7vye
A canister that should hold any rolls of 120mm camera film you have lying around.
There's 2 files included in the download.'Polysoup' is a one-piece model that will need to be built with support for the lid. 'film canister 21' has the lid separate to the canister if you'd prefer to print without the need for support. You'll need to slip the lid ring over the case and then glue it on though.
Black filament would be best - naturally you want the canister to leak as little light as possible.
The 'tab' that joins lid to canister is flexible enough (with ABS at least) to bend in the middle so that the lid sits on top nicely.
I can upload the lid with no tab/ring if requested.
Liked ByView All
Give a Shout Out
120mm film canister by guydebored is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure guydebored would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).