Blade pitch gauge attachment for iPhone
by odie_wan, published
This is an attachment so you can use your iPhone 4s and the Clinometer app http://plaincode.com/products/clinometer/ as a RC heli rotor blade pitch gauge.
Print out the parts and bolt together with M3 x 10mm and M3 x 18mm socket head cap screws.
Note: this is designed to work with a naked iPhone. No cases, screen guard. It's a nice snug fit to keep down on errors. There is an internal channel in the top clamp part for rubber bands, but it doesn't really need it.
The "pg Phone Mount Main v2" file has a small rectangular piece. Print that part out and cut that piece off and bolt to the front of the Mount main part.
Liked ByView All
Give a Shout Out
Blade pitch gauge attachment for iPhone by odie_wan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving odie_wan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure odie_wan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).