HC-SR04 Ultrasonic Module L-bracket
by wsolstice69, published
This is a bracket designed to hold the HC-SR04 Ultrasonic Distance Module or similar sonar module, and allow it to be mounted to a servo motor shaft or a flat surface. (Note: this holds the module with the connection lead pins facing up, for my application I replaced the L shaped lead pins with straight pins) This should hold the module via a friction fit, however you can also use a small bit of foam mounting tape for a better hold. I have tried this out on a couple of different HC-SR04 modules and found that the tolerances in the component placement on the modules are not very tight, so I have included the .scad file if you need to make any modifications.
Please let me know if you found this useful.
This is a small part so use a cooling fan if you have one for a cleaner print.
Liked ByView All
Give a Shout Out
HC-SR04 Ultrasonic Module L-bracket by wsolstice69 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure wsolstice69 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).