by ragados, published
This Card Box is designed to contain ~60 Cards sleeved in Mayday Games Standard Green Card Sleeves (these sleeves fit cards from games like Thunderstone & Call of Cthulhu: Living Card Game).
All my models are designed to be built using a Replicator (as this is the 3D Printer that I have ready access to).
I have built this model twice now. and have found the following settings to be preferable: Printed at 10% infill with 2 shells and a layer height of .10.
The results were good however the interference fit required a little sanding. I have created a new model that should address this and will test that shortly before uploading (walls may now be too thin).
Liked ByView All
Give a Shout Out
Card Box by ragados is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure ragados would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).