makerbot window clip for 1/8 inch clear plastic
1
Likes
65
Downloads
534
Views
Published on January 17, 2013
Derived from
Window clip for makerbot
by jag
Description
Yes, it is another makerbot window clip. this one is made so the window does not overlap the opening and interfere with the various screws and the display which are close to the openings.
it was based on jags window clip but i created it from scratch.
it was based on jags window clip but i created it from scratch.
Instructions
Print however many of them you will need, i used 3 on the sides and 4 on the front.
i used 10% infill 1 shell ABS, (replicator 2 profile in replicatorG) you will have to make it more solid if you use PLA (rep 2 owners)
Then you need 3 bits of lexan, plexiglass etc. 1/8 thick. (i can make other thickness on request, i cant make the file parametric, because i made it in 3ds max)
2 Pieces are 8 3/4" square, and one piece is 8 3/4 x 15"
everything just clips together, you dont need any screws or dissasembly.
If you wanted to completely seal the windows, you could put some of that sticky foam door sealer tape around the perimiter, i havent needed to do that yet, ill see what happens in the summer with AC and ceiling fan.
i used 10% infill 1 shell ABS, (replicator 2 profile in replicatorG) you will have to make it more solid if you use PLA (rep 2 owners)
Then you need 3 bits of lexan, plexiglass etc. 1/8 thick. (i can make other thickness on request, i cant make the file parametric, because i made it in 3ds max)
2 Pieces are 8 3/4" square, and one piece is 8 3/4 x 15"
everything just clips together, you dont need any screws or dissasembly.
If you wanted to completely seal the windows, you could put some of that sticky foam door sealer tape around the perimiter, i havent needed to do that yet, ill see what happens in the summer with AC and ceiling fan.
License
makerbot window clip for 1/8 inch clear plastic by Neutron7 is licensed under the Attribution - Share Alike - Creative Commons license.
More from Neutron7
More from 3D Printer Accessories
You must be logged in to post a comment.