Connect 4 Token
by Alzibiff, published
I was asked to make some replacement Connect4 tokens for someone who had lost three of each colour. No problem I thought. Silly me - the real life tokens have 24 holes and 24 blips on them which enable one token to stack onto another. However, it was a good CAD exercise and although producing them requires a printer capable of some very fine detail, the ones shown here worked just like the originals.
There are two STL files here. One is a plain disk with a bevel on the top and bottom. The dimensions are 32mm diameter and 7.6mm height. However, to produce a good facsimile with the holes and blips, you will need to print two half counters using the other file and then glue them together.
Liked ByView All
Give a Shout Out
Connect 4 Token by Alzibiff is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Alzibiff a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Alzibiff would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).