Sticky Note and Pen holder for Fridge
by Gozeeta, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My co-workers wanted a way to mark the food in the shared fridge with our name and date without having to permanently mark our containers (otherwise food would be forgotten/wasted). The sticky notes and pens were out of sight and out of mind so I created this to stick onto the fridge.
This thing has 3 holes in the back to fit the magnets I had spares of, about 4mm dia. and 3mm deep, but you might have different magents.
The holder can fit either the 3in. or 2in pads, the slot cut in the center allows easy access to the smaller pads. The pen hole was actually measured to fit up to a standard Sharpie marker.
MakerWare 1.0 oriented upright and multiple mouse ears (http://www.thingiverse.com/thing:38272) on the corners
Miracle Grue Medium settings
.25mm layer thickness
My Replicator 2 likes to squash vertical holes, so the holes for the magnets had to be cleaned up, but only a little bit so that the magnets could still be friction fit.
Sticky Note and Pen holder for Fridge by Gozeeta is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Gozeeta a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Gozeeta would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).