Magnetic Sharpie-Cap Screwdriver
by ComradeQuiche, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A remix of Areeve20's "Sharpie Cap Screwdriver", Bulked out a bit, and added a slot where a small magnet can be mounted.
I printed this remix with a Makerbot 2 so I redesigned some components to work more smoothly with this 3d printer in particular. (I ran it at 1.2mm resolution)
NOTE: I have just updated and re-uploaded the model as for some reason it was in meters instead of millimeters. Thanks Areeve20 for pointing that out! Please download the new files!
Print the cap, buy TWO D2H1 magnets, mount magnet, use as a screw driver/ sharpie cap.
( I bought mine here: http://www.kjmagnetics.com/proddetail.asp?prod=D2H1 )
More detailed instructions:
Stick the magnets onto the flat base of a screw driver bit, and press the whole thing down into the hex-holder on the cap, this will force the magnet down into a tapered slot. Once its inserted into the slot, drop some super glue from the other side of the cap (The side that the sharpie goes into) to glue the magnet in place. Once dry just pop in your favorite bit and drive screws... or un-drive screws.
Note I have included a quick video, an .STL file, and an .IGES in case anyone wanted to make changes.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Magnetic Sharpie-Cap Screwdriver by ComradeQuiche is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ComradeQuiche a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ComradeQuiche would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).