by Sungod3k, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Apart from your zipper breaking the endstop is the part which falls of most often. The design to basically a simple bracket to hold both end in the right position to start zipping.
Its fitted to a bigger zipper of a winter jacket but i think it can be adjusted for other sizes easily.
Printed in PLA with 25% infill and 2 shells with cooling at 100%.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Zipper endstop by Sungod3k is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Sungod3k a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Sungod3k would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).