Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Bind reducing X end for Thomson Leadscrew
0
Likes
186
Downloads
498
Views
Published on January 18, 2013
Description
This is a modified version of the bind reducing X end from kludgineer, which accepts the Thomson Leadscrew from Trinity Labs. Intended for 10mm bushings on the Z axis, and 8mm rods on the X axis.
This is my first attempt at modifying a design, any problems please let me know. I will post the idler STL once I have tested it to ensure it works. Download the motor end and the idler end, and print off two copies of the clamp.
This is my first attempt at modifying a design, any problems please let me know. I will post the idler STL once I have tested it to ensure it works. Download the motor end and the idler end, and print off two copies of the clamp.
Instructions
Required parts list:
8 M5x20 for the clamp
6 M4x30 or M5x30 for the leadscrew nuts
4 10mm bushings
8 M5x20 for the clamp
6 M4x30 or M5x30 for the leadscrew nuts
4 10mm bushings
License
Bind reducing X end for Thomson Leadscrew by mitchese is licensed under the Attribution - Share Alike - Creative Commons license.
More from mitchese
More from 3D Printer Parts
You must be logged in to post a comment.