40 x 80 x 40mm Calibration Object
by SDCPs, published
See if your x, y, and z axis are calibrated...is your object 40 x 80 x 40mm?
Print with low infill or print hollow. Ideally, 2 perimeters and < 10% infill.
This object is large so you can see where the issues are.
Liked ByView All
Give a Shout Out
40 x 80 x 40mm Calibration Object by SDCPs is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure SDCPs would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).