FoldaRap spool holder
1
Likes
162
Downloads
774
Views
Published on January 20, 2013
Description
A quick fix for when the light 1kg spool start to be pulled by the extruder instead of unrolling from the spool rollers (thing:33573).
(That's why I prefer to use 2.3kg spool otherwise)
(That's why I prefer to use 2.3kg spool otherwise)
Instructions
The 50x50mm plate is to be used with a 200mm extrusion profile (and two 20x20 test part as a way to keep the spool on it)
The other part is for 8mm threaded rod, should work but haven't been tested.
The other part is for 8mm threaded rod, should work but haven't been tested.
You must be logged in to post a comment.
License
FoldaRap spool holder by watsdesign is licensed under the Attribution - Share Alike - Creative Commons license.
More from watsdesign
More from 3D Printer Accessories
J'envisage le même style mais en remplaçant le profilé alu extrudé par un tube d'alu rond de diamètre extérieur 12mm.
Le diamètre intérieur de la bobine est sur des roulements ou directement sur le tube alu ? de cette manière ca fonctionne ?
la bobine est directement sur le profilé, le moteur a pas de problème pour la tirer, mais un tube marchera sans doute mieux :)