Loading

dial gauge holder - for 8mm rods and various rod span

by MLworx, published

dial gauge holder - for 8mm rods and various rod span by MLworx Jan 20, 2013

Description

designed for Prusa (8mm rods; 50mm distance) but suitable for every other printer too

diameter of the dial gauge bore: 8mm

Recent Comments

view all
Calibration with a dial gauge should be done when you're fine tuning your machine - for basic setup there are other more easy methods as simply checking every edge of your printbed <-> x Axis with a matching piece in between (+ add sheets of paper: 0,1mm!) - after that you can do the fine tuning!
Worked pretty well, even with a non-perfect print bed. The design makes it working on many different geometries - which is great. After I used it I got much better prints.

This is an anti chicken-egg tool. How to print calibration tools if the printer isn't set up appropriate?

More from 3D Printer Accessories

view more

Makes

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

remove all small printing knobs so that the holders does not jiggle on the rods

Worked pretty well, even with a non-perfect print bed. The design makes it working on many different geometries - which is great. After I used it I got much better prints.

This is an anti chicken-egg tool. How to print calibration tools if the printer isn't set up appropriate?
Calibration with a dial gauge should be done when you're fine tuning your machine - for basic setup there are other more easy methods as simply checking every edge of your printbed <-> x Axis with a matching piece in between (+ add sheets of paper: 0,1mm!) - after that you can do the fine tuning!
Top