Desperate Operators Replicator 2 Extruder Upgrade
by funkshin, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Couldn't wait for the bearings to arrive and couldn't print the parts necessary to make this great upgrade. So I made due.
While picking up springs at the local hardware store to implement this I saw an assortment box and grabbed that as well. Found a spring that fit the existing slot and replaced the factory set screw nut and o-ring. I'm still using the stock plunger, but I'm tearing through printers looking for single metal ball to replace it. Thats a 340mm whpthomas profile print. First one off the plate after reassembly. No adjustments necessary.
Desperate Operators Replicator 2 Extruder Upgrade by funkshin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving funkshin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure funkshin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).